= Getting Started: Building and Debugging PJSIP on Symbian S60 3rd Edition Device using Carbide C++ = [[TracNav(Getting-Started/TOC)]] Deploying PJSIP on Symbian S60 is recommended only on real devices as the emulator has audio and networking problems. This document covers the following topics: [[PageOutline(2-3,,inline)]] ---- == Requirements == For this tutorial, we will need: - [http://www.forum.nokia.com/info/sw.nokia.com/id/4a7149a5-95a5-4726-913a-3c6f21eb65a5/S60-SDK-0616-3.0-mr.html Symbian S60 3rd Edition Maintenance Release (MR)]. We also have tried this on FP1. Other SDK versions may work, but I did not test it. - [http://www.forum.nokia.com/info/sw.nokia.com/id/dbb8841d-832c-43a6-be13-f78119a2b4cb.html Carbide C++ version 2.0]. You will need choose Developer Edition during install to do on-device debugging. - [http://europe.nokia.com/A4144903 Nokia PC Suite] for the connectivity between the device and your PC (I use version 6.85) - [wiki:Getting-Started/Download-Source pjsip source code] - Nokia S60 3rd Edition device (I use Nokia E70, but any S60 3rd Edition device should do, I think). The date and time of this device need to be the same as development PC otherwise you may get certificate errors. - Nokia data cable for on-device debugging (you can also use Bluetooth connection, but this tutorial will not cover it) ---- == Installations == === SDK === Follow the installation instructions in the SDK documentation (make sure that the SDK requisites, such as [http://downloads.activestate.com/ActivePerl/Windows/5.6/ Perl version], are satisfied). Please install Symbian SDK on the same drive as PJSIP. === Carbide === Follow the installation instructions in the Carbide C++ documentation. The installation should be straightforward, but don't forget to '''select the Developer's Edition''' to get the On-Device debugging/TRK Debugging feature. === Nokia PC Suite === Install PC Suite, connect your device with the USB cable, and make sure your PC can access your device. ==== Connect Data Cable ==== Connect the USB cable to the phone, and on the phone, select '''PC Suite''': [[Image(DevelopingSymbianAppWithCarbide:phone_usb.JPG)]] If this is the first time you connect your phone to the PC, then it may take some time for Windows to install the USB drivers for the phone. Wait for it to complete and the Nokia PC Suite and PC Sync icons on the task bar tray become green: [[Image(DevelopingSymbianAppWithCarbide:pc_suite.JPG)]] Leave PC Suite running with the device connected using the USB cable throughout this tutorial session. === PJSIP === Retrieve and configure PJSIP: 1. For this tutorial, I assume pjsip will be checked out to '''{{{C:\project\pjproject}}}''' directory. 1. Checkout PJSIP from the usual location (see [http://www.pjsip.org/download.htm PJSIP Download page] for details). 1. Fill in your '''{{{config_site.h}}}''' with: {{{ #include }}} ---- == Importing PJSIP Projects == Run Carbide C++. When it asks the workspace location, enter a directory where you would want to put Carbide specific settings for PJSIP (or just accept the default value): [[Image(DevelopingSymbianAppWithCarbide:carbide-workspace.JPG)]] You will now be presented with Carbide Welcome page. Now we need to import PJSIP's project files (the MMP files) into Carbide's workspace. Select '''File''' --> '''Import''' from the menu: [[Image(DevelopingSymbianAppWithCarbide:file_import.JPG)]] This dialog below will pop up. Select '''Symbian OS''' --> '''Symbian OS Bld.inf file''' from the list, then press '''Next''' button: [[Image(DevelopingSymbianAppWithCarbide:import.JPG)]] On the next dialog, click '''Browse..''' button to select '''bld.inf''' file from PJSIP's {{{build.symbian}}} directory, then press '''Next''' button: [[Image(DevelopingSymbianAppWithCarbide:import_bld.JPG)]] Then on the SDK selection dialog, select the build configurations that you want to support. For this tutorial, select WINSCW and GCCE from S60 3rd Edition MR SDK, and press '''Next''' button ('''do not select ARMV5 unless you have the commercial ARMV5 compiler'''): [[Image(DevelopingSymbianAppWithCarbide:import_sdk.JPG)]] You will then presented with MMP selection dialog. Leave the default selection (normally it should select all MMPs) and press '''Next''': [[Image(DevelopingSymbianAppWithCarbide:import_mmp.JPG)]] The project now is ready to be imported, press the '''Finish''' button: [[Image(DevelopingSymbianAppWithCarbide:import_finished.JPG)]] Carbide is now exporting the MMP files into the workspace and this progress window will be displayed: [[Image(DevelopingSymbianAppWithCarbide:import_creating.JPG)]] Wait for the process to complete. Once it completes, you will see the PJSIP project tree on the bottom left part of the Carbide main window: [[Image(DevelopingSymbianAppWithCarbide:carbide_main.JPG)]] On the '''Problems''' pane (bottom center of the main window) you may see one ''Warning'' about duplicate path, but we can ignore this for now. The projects should now be ready to be build. ---- == Building the Projects == Let's try to build the project first to make sure that the source is okay. === Select the Build Configuration === First select the build target by selecting '''Project''' --> '''Build Configuration''' --> '''Set Active''' from main menu (or right clicking the ''Bld.inf'' or ''pjproject'' item from ''Symbian Project Navigator'' pane from the bottom left part of the main window). Select '''Phone Debug (GCCE) [S60_3rd_MR]''' from the menu: [[Image(SetActiveBuildConfiguration.png)]] === Build the Project === Then right click ''Bld.inf'' or ''pjproject'' item from ''Symbian Project Navigator'' pane from the bottom left part of the main window, and select '''Build Project''': [[Image(build-project.png)]] Wait for the build process to complete. You may take a peek on what Carbide is doing by clicking on ''Console'' pane/tab in the bottom part of main window. Once it completes, watch out for any errors in the ''Problems'' pane (at the bottom center). There shouldn't be any errors, although there may be few warnings which I think can be ignored, for now: [[Image(DevelopingSymbianAppWithCarbide:build_problems.JPG)]] We are now ready to build the .sis/.sisx file to be deployed to the phone. ---- == Preparing the .sis/.sisx File == The .sis file is the packaging for the executable to be deployed in the device. The .sisx file is a signed .sis. Both the .sis and .sisx file can be created very easily with Carbide C++. === Set the .pkg File to be Used === First we'll need to configure the .pkg file to be used to generate the .sisx file. PJSIP provides some sample .pkg files which can be used, however there may be few editing needed before you can use them (this is because the .pkg file contains absolute directory path for your Symbian SDK, which may be different on your installation). Assign the .pkg file to be used by the project by selecting Project Properties: [[Image(DevelopingSymbianAppWithCarbide:project_properties_menu.JPG)]] Then Project Properties dialog will appear. On this dialog: 1. Select ''Carbide Build Configuration'' from the tree (left part of the dialog). 1. Make sure that the Active Configuration is set to '''Phone Debug (GCCE) [S60_3rd_MR]''' (the SDK name will be different, if you use different SDK version) 1. Set the ''PKG File'' by clicking ''Add'' button, and choose {{{symbian_ua.pkg}}} from PJSIP's {{{build.symbian}}} directory. [[Image(add-sis-builder.png)]] [[Image(select-pkg.png)]] We can leave the "SIS creation and Signing" settings empty to use the default settings. Press ''OK'' button to save the project configuration. [[Image(add-pkg-file.png)]] Now right click '''bld.inf''' (or '''pjproject''') and click '''Refresh''': [[Image(DevelopingSymbianAppWithCarbide:project_refresh.JPG)]] Wait for few seconds (30 seconds on my computer) for Carbide to do its job, once it's done, you will see the .pkg file in the ''Project Navigator'' pane: [[Image(pkg-in-explorer.png)]] === Build the SISX File === Once PKG has been setup on the project, a SISX file will be created everytime we build the project. So lets build the project now. Right click ''Bld.inf'' or ''pjproject'' item from ''Symbian Project Navigator'' pane from the bottom left part of the main window, and select '''Build Project''': [[Image(build-project.png)]] The build process will start. You can take a peek on the '''Console''' tab to see what's being done. Once the build process completes, you should see something like this on the '''Console''' tab: {{{ Signing ***SIS Creation Complete Total Time: 12 sec }}} Check the '''Problems''' tab again to see if we have any errors (there shouldn't be any). === Deploy the sisx file to phone === Using Nokia Application Installer (included with PC Suite), try installing the {{{symbian_ua.sisx}}} file, located in the {{{build.symbian}}} directory. It should install successfully. If not, double check: * Application Manager has been set to allow all * Date and time of phone matches development PC ---- == Configuring On-Device Debugging == Make sure the phone is connected to the PC using the data cable. === Configuring Device Security === By default, your phone does not allow self-signed certificate to be installed on the phone, I think. To change this setting: 1. Go to '''Menu''' --> '''Tools''' --> '''App. Mgr''' 1. On ''App. manager'', select menu '''Options''' --> '''Settings''' 1. Set '''Software installation''' to '''All''' === Installing TRK 3.x Application on the Phone === Install TRK 3.x support on the phone. You can do this via the On Device Connections menu on Carbide: [[Image(setup-connection.png)]] You will be presented with a choice of connections. Choose '''USB''', not {{{TRK 2.x USB}}}. [[Image(connection-type.png)]] In the next screen, choose the tab '''Install Remote Agent''': [[Image(install-remote-agent.png)]] You will need to choose the appropriate installer for your phone: ||'''Phone'''||'''Installer'''|| ||S60 3rd Plain/MR||3.0.0|| ||S60 3rd FP1||3.1.0|| ||S60 3rd FP2||3.2.0|| ||S60 5th||5.0.0|| Now click '''Install'''. When asked if we want to install, click '''Yes''': [[Image(DevelopingSymbianAppWithCarbide:trk_install.JPG)]] On the PC, this window should be displayed. [[Image(DevelopingSymbianAppWithCarbide:trk_wait.JPG)]] Leave it this way, the installation will start on the phone now. Your phone should display something like this: [[Image(DevelopingSymbianAppWithCarbide:trk_p_install.JPG)]] Click Yes. Now the phone will display '''Details''' information: [[Image(DevelopingSymbianAppWithCarbide:trk_p_details.JPG)]] Click Continue. Your phone may now display the target memory location: [[Image(DevelopingSymbianAppWithCarbide:trk_p_mem.JPG)]] Select the memory and press '''Select''' menu. Now the phone will display license agreement: [[Image(DevelopingSymbianAppWithCarbide:trk_p_lic.JPG)]] Click '''OK''' (if you agree, of course). The phone should display installation progress window for couple of seconds now: [[Image(DevelopingSymbianAppWithCarbide:trk_p_progress.JPG)]] Once it's done, '''Installation Complete''' window will appear briefly: [[Image(DevelopingSymbianAppWithCarbide:trk_p_complete.JPG)]] TRK is now installed on the phone. Next step is to run it. === Running TRK Application on the Phone === 1. Run it from '''Menu''' --> '''Installations''' --> TRK (it may be different on your phone). 1. When it asks to switch on Blueetooth, click '''No'''. We use USB cable for this session. 1. The TRK window will appear. We can ignore the error message for now: [[Image(DevelopingSymbianAppWithCarbide:trk_r_welcome.JPG)]] 1. Select '''Options''' --> '''Settings''' menu. 1. Change the '''Connection''' to USB, and leave all settings unchanged. (Note: You may not get the baud rate settings input): [[Image(DevelopingSymbianAppWithCarbide:trk_p_usb.JPG)]] 1. Click '''Back''' to get back to TRK main window. 1. Now select '''Options''' --> '''Connect''' from the menu. 1. TRK main window should display '''Status: Connected''' now. There might less info on newer version of TRK, but as long as it says Connected, you're good to go: [[Image(DevelopingSymbianAppWithCarbide:trk_p_connected.JPG)]] Leave TRK running on the phone for the duration of this tutorial, and move on back to Carbide to set the connection up. === Setting and Testing Connection Settings === Click on the '''Set Connection Settings''' tab, and choose the serial port that have your device name next to it. You might need to scroll a long way down, mine was COM17: [[Image(choose-serial-port.png)]] Now you can test the connection. Click on '''Test Service Testing''': [[Image(initiate-trk-testing.png)]] If everything is successful, you will get the following on the area in the big status textbox: [[Image(test-trk-success.png)]] Click '''Finish''', and you should be rewarded by a new connection appearing in the '''Remote Connections''' area in Carbide C++: [[Image(trk-connection-list.png)]] === Start Debugging === Because we haven't setup a debug configuration, if you start debugging, Carbide C++ will offer you to setup one. On the ''Symbian Project Navigator'' select bld.inf, and press debug on the toolbar (the picture of the bug...): [[Image(new-launch-configuration.png)]] You will get the Launch Configuration Wizard. Click '''Next'''. You'll get : [[Image(executable-selection.png)]] Executable should already be set to {{{symbian_ua.exe}}}, so just click '''Next'''. You'll get: [[Image(trk-conn-settings.png)]] This should be defaulted to {{{connection 1}}} which we have setup earlier. Click '''Next'''. You'll get: [[Image(trk-sis-selection.png)]] Verify that the sisx is {{{symbian_ua.sisx}}} which we already tested beforehand. Click '''Next''' then '''Finish'''. You should immediately begin debugging. Carbide now may rebuild the project (you may take a peek on what it's doing by looking at '''Console''' tab). Once it's done, Carbide will switch to ''Debug Perspective'' and the SIS file will be downloaded to the phone and this window will appear briefly: [[Image(DevelopingSymbianAppWithCarbide:debug_download.JPG)]] When this window dissappear, you should see the application runs on the phone: [[Image(DevelopingSymbianAppWithCarbide:symbian_ua.JPG)]] You may make calls, receive calls, do presence stuffs, etc. Full debugging should also be possible; you may set breakpoints, step into functions, etc. You can now move on to bigger and better things: [wiki:APS APS & VAS] ---- == Common Problems == === Problem with Build/Clean === Sometimes Carbide does not build the project properly after we make some changes to the source. This will cause the old code to be built instead of the new changes. My standard work flow is to always clean the library/application project containing the modified source before building the whole project, to make sure that the modified libraries/application gets rebuilt properly. === I/O Error: File in Use (I/O Fault) === Sometimes .SIS creation fails with I/O error message in the ''Problems'' pane similar to this message: {{{ file I/O fault makesis.exe returned with exit value == 1 The process cannot access the file because it is being used by another process. }}} This sounds like a generic error from the build system, and it may be caused by several problems. You can try these and see which one solves it: 1. First check that the build process has completed without errors (a build error will cause the executable not to get built, and this will cause .sis creation to fail). 1. Rather than selecting "Build Target Only", try with "Build Project" from the menu. Sometimes build directories are not created when "Build Target Only" is used. 1. Try cleaning and re-building the project. 1. Sometimes restarting Carbide C++ also fixes it. === TRKProtocolPlugin: Failed to download the specified file to target === I had experienced this few times. The file seems to be downloaded to the phone fine (the download progress bar shows progress), but once debugging starts Carbide displays "Carbide Alert": "Load Failed", "TRKProtocolPlugin: Failed to download the specified file to target" (as shown in the picture below). [[Image(DevelopingSymbianAppWithCarbide:trk_fail.JPG)]] I'm not sure what's causing this, but closing TRK on the phone, then reconnecting the USB cable and restarting TRK seems to have fixed this. === TRKProtocolPlugin: Failed to continue thread === [[Image(DevelopingSymbianAppWithCarbide:trk_fail2.JPG)]] The solution is similar to above. === TRK Not Running Error === Sometimes I get Carbide complaining about TRK not running: {{{ Launching Target request failed: TRKProtocolPlugin: Can't connect to TRK (TRK may not be running on the phone or mismatch between selected and connected com port.). }}} Like this dialog: [[Image(DevelopingSymbianAppWithCarbide:trk_not_running.JPG)]] If you see TRK is running on the phone, it means that your phone is hung now. Restart the phone by disconnecting the USB cable, taking of the battery, put it back on, start the phone, connect the USB cable, and re-run TRK again. === High Audio Latency === We're working on this issue. === Random Crash/Stack Size Problem === When you have random crash (sometimes in ICE/pjnath or in DNS SRV resolver) or KERN-EXEC 3 when running without debugger, check if increasing stack size in the MMP fixes the problem. The default stack size (8KB) '''is not sufficient''', hence in {{{symbian_ua.mmp}}} the EPOCSTACKSIZE setting is set to 12KB. ---- == Other Resources == Checkout: - [http://newlc.com/Carbide-c-Setting-up-On-Target.html Carbide.c++: Setting up On Target Debugging | NewLC] - this article describes how to set up on-device debugging using Bluetooth connection.